Jaydeep Engineering Co.
Products /

Centrifugal Pumps

SPLIT CASE CENTRIFUGAL PUMPS [HORIZONTAL AND VERTICAL]

range

Capacity
:
10 m3 per hour to 4000m3 per hour.
Head
:
Upto 100m(also upto 220m with multistage design).
Speed
:
Upto 3500rpm.
Sizes
:
25 to 400 mm.
Input Power
:
Prime movers, Diesel or Petrol Engine.
Electric Motor
:
Three phase or Single phase.
Cycles
:
50 or 60 Hz.
Voltage
:
Available for a wide range of input voltages from 110/220/300/400/440/500 Volts.
SPLIT CASE CENTRIFUGAL PUMPS

FEATURES

  • Horizontal or Vertical arrangement
  • Single and multi stage.
  • Axially split casing
  • Double suction for single stage
  • Single suction for two stage
  • Available in various Material of construction such as CI, Bronze, GM, SS , Ni-Hard, Duplex SS, etc.
  • Mechanical sealed or gland packed.
  • Internal coating with special fillers for longer life and higher hydraulic efficiency. Such as corrocoat, aremco, ceramic, epoxy, glass filled polymers, etc. as per the duty conditions .Please send us the inquiry alongwith full details.
  • Special Designs for Ship’s fire pumps, Fifi 1, Fifi 2, Fifi 3, etc.
  • With Kumera/Jason/Hitech Gear Box or Direct Coupled.
  • We have an excellent design back-up. For any application and duty point, We will design and supply pumps, if the same are not already in our range.

We supply pumps with a variety of construction features such as

Side suction
:
Side discharge
End suction
:
Top discharge
Side suction[Left or Right]
:
Top discharge
Bottom suction
:
Top discharge or Side discharge.

Clockwise or Anti clockwise Rotation.

END SUCTION TOP DISCHARGE [BACK PULL OUT] CENTRIFUGAL PUMP

END SUCTION TOP DISCHARGE CENTRIFUGAL PUMP

RANGE

Capacity
:
2 to 2000m3/hour.
Head
:
2 m. to 175m.
Speed
:
UPTO 3600rpm.
Sizes
:
30mm to 250mm

Features

  • With enclosed, semi open and open type impellers in CI, GM,Bronze, SS, Duplex, Hastelloy, etc..
  • For a wide range of liquids.
  • Suitble for applications in process, dewatering, chemical and water supply.
  • Many models available with self priming feature.
  • Designed & built to Intenational std ISO 2858, API, DIN 24255.
  • High strength _1600KPAa working pressure_60%higher than others
  • Can outperform size for size any other pump in the market.
  • Higher efficiency Lower operating cost, Long life
  • Low cost, simple maintenance
  • Excellent interchangeability
  • Can be supplied with a variety of optional features like
  • Mechanical seals
  • External Gland flush
  • Guage tappings
  • Wear rings
  • Shaft sleeves
  • Oil lubricated bearings.
  • Vertical installations.
  • Available in various Material of construction such as CI, Bronze, GM, SS, Ni-Hard, Duplex SS, etc. Internal coating with special fillers for longer life and higher hydraulic efficiency.
  • Available with self priming feature for sizes upto 200mm.
  • Special Designs for Ship’s fire pumps, Fi-Fi 1, Fi-Fi 2, Fi-Fi 3, etc.
  • With Gear Box or Direct Coupled.
  • Prime movers:- Electric Motor/ Diesel Engine/ Petrol Engine.

Applications

Fresh water, sea water, fire water, sewage,dewatering, muddy water, drainage, raw water, heat exchanger cooling, main engine cooling, petrochemicals, petrol, diesel, fuel oil, lube oil, viscous liquids, process industries, petrochemicals, wide range of liquids, water, fire fighting, corrosive and abrasive liquids, hydrophore, suction boosting.

CENTRIFUGAL MULTISTAGE PUMPS [Vertical and Horizontal]

range

Capacity
:
2m3/hour to 900m3/hour.
Head
:
Upto 1000m.
Size
:
18 mm and above.
CENTRIFUGAL MULTISTAGE PUMPS

FEATURES

  • High efficiency
  • Available in various material of construction & variety of optional features.
  • Can be vertical or horizontal.

APPLICATIONS OF 3, 4 & 5

  • Process Applications
  • Fire protection duties
  • Sprinkler, drip & flood irrigation
  • Water supply
  • Steel, Marine chemical, cement, paper, sugar and power industries
  • Cold and hot water circulation.
  • Boiler feed.
  • Hot oil.
  • Air conditioning plants, water treatment plants, Boiler Feed
  • High rise buildings
  • High pressure/high head applications.
  • Shipping and offshore.
  • Inline pressure boosting applications.

SELF-PRIMING SINGLE STAGE AND MULTISTAGE PUMPS

SELF-PRIMING SINGLE STAGE AND MULTISTAGE PUMPS

range

Capacity
:
2m3/hour to 30m3/hour.
Head
:
Upto 350mts.
Size
:
18 mm and above.

FEATURES

  • High efficiency
  • Available in various material of construction & variety of optional features.
  • Impellers can be closed and semi open types.
  • Can be vertical or horizontal.

APPLICATIONS OF 3, 4 & 5

  • Process Applications
  • Fire protection duties
  • Emergency fire pumps
  • Sewage and dewatering applications.
  • Sprinkler, drip & flood irrigation
  • Water supply & water supply booster applications.
  • Installations in municipal mains for water supply boosting.
  • Steel, Marine chemical, cement, paper, sugar and power industries
  • Cold and hot water circulation.
  • Boiler feed.
  • Hot oil.
  • Air conditioning plants, water treatment plants, Boiler Feed
  • High rise buildings
  • High pressure/high head applications.
  • Shipping and offshore.
  • Fresh water.
  • Sea water.
  • Drinking water.
  • Suction booster.
  • Sea Water Hydrophore Pumps.
  • Suction boosting from municipal lines.

VERTICAL SEWAGE / EFFLUENT PUMPS

VERTICAL SEWAGE, EFFLUENT PUMPS
Range
:
0.5hp to 50hp.
Total head
:
Upto 50m.
Solid handling
:
Upto 150mm.
Capacity
:
Upto 600m3/hr
Column height
:
Upto 6 meter.
Sizes
:
40mm to 200mm

FEATURES

  • Screenless, Chokeless, Glandless
  • Available in various Materials of construction
  • Small / portable units also available

APPLICATIONS

  • Sugar factories, sewage pumping station, chemical plants.
  • Liquids with solid contents
  • Construction sites, Trench & Tunnel water

CENTRIFUGAL & SELF PRIMING MONOBLOCS PUMPS

CENTRIFUGAL & SELF PRIMING MONOBLOCS PUMPS
Range
:
Upto 40hp
Total head
:
Upto 180m.
Capacity
:
Upto 1200lpm.
Speeds
:
Upto 3600 rpm.
1 and 3 phase
:
110/ 220/380/440/500
Volts
:
50 and 60 Hz.

FEATURES

  • Back pull out construction
  • Carry out repairs without disturbing suction and delivery pipes.
  • Works under high voltage fluctuations
  • High efficiency over wide range of operating head
  • Available with a wide range of materials and seal options.
  • Available in 1 phase and 3 phase. 110/ 220/380/440/500 Volts. 50Hz and 60 Hz.

Applications

Will work on almost all applications where centrifugal pumps are used such as water supply, irrigation, building water supply, suction boosting from municipal mains, terrace fire booster.

JET/EJECTO PUMPS

JET, EJECTO PUMPS
Range
:
Upto 20hp.
Suction
:
Upto 120 m.
Discharge
:
Upto 120m.
Capacity
:
10lpm to 600lpm.

FEATURES

  • Extremely compact
  • Easy to install
  • Lower maintenance
  • Mechanical/Rotary seal
  • Suitable for wide voltage fluctuation
  • High efficiency
  • Horizontal and vertical construction.

APPLICATIONS

  • Water supply, Industry and agriculture
  • Borewells and open wells
  • For suction lift of more than 30 feet/10mts.

Pressure Pumps for Water Supply

Range

Capacity
:
1 m3 per hour to 400m3 per hour. Single pump and multi pump. with or without pressure tanks.
Head
:
Upto 300m with multistage design.
Speed
:
Upto 3500rpm.
Size
:
25 to 300 mm.
Input Power
:
Electric
Motor
:
Three phase or Single phase.
Cycles
:
50 or 60 Hz.
Voltage
:
Available for a wide range of input voltages from 110/220/300/400/440/500 Volts.
Pressure Pumps for Water Supply

FEATURES

  • Horizontal or Vertical arrangement
  • Single and multi stage.
  • Available in various Material of construction such as CI, Bronze, GM, SS, Ni-Hard, Duplex SS, etc.
  • Mechanical sealed or gland packed.
  • We have an excellent design back-up. For any application and duty point, We will design and supply pumps, if the same are not already in our range.
  • Clockwise or anti clockwise Rotation.

APPLICATIONS

  • Process Applications
  • Fire protection duties
  • Sprinkler, drip & flood irrigation
  • Water supply to hotels, industry, housing society, bunglow, apartments, shower , Jacuzzi, rain shower panels, bathroom accessories that require pressurized water.
  • Water Filtration
  • Cold and hot water circulation.
  • Air conditioning plants, water treatment plants, Boiler Feed
  • High rise buildings
  • High pressure/high head applications.
  • Shipping and offshore.
  • Pressure boosting applications.

Shower pumps/ booster pressure pumps

Range

Capacity
:
1 m3 per hour to 400m3 per hour. Single pump and multi pump. with or without pressure tanks.
Head
:
Upto 300m with multistage design.
Speed
:
Upto 3500rpm.
Size
:
25 to 300 mm.
Input Power
:
Electric
Motor
:
Three phase or Single phase.
Cycles
:
50 or 60 Hz.
Size
:
0.1 to 5.0 Hp.
Voltage
:
Available for a wide range of input voltages from 110/220/300/400/440/500 Volts.
Shower pumps, booster pressure pumps

FEATURES

  • Horizontal or Vertical arrangement
  • Single and multi stage.
  • Available in various Material of construction such as CI, Bronze, GM, SS, Ni-Hard, Duplex SS, etc.
  • Mechanical sealed or gland packed.
  • We have an excellent design back-up. For any application and duty point, We will design and supply pumps, if the same are not already in our range.
  • Small compact design.
  • Silent, super silent with very low sound level.

APPLICATIONS

  • Sprinkler, drip & flood irrigation
  • Water supply to hotels, industry, water filtration, housing society, bungalow, apartments, shower, Jacuzzi, rain shower panels, bathroom accessories that require pressurized water, water filter, porta cabins.
  • Cold and hot water circulation.
  • Air conditioning plants, water treatment plants, Boiler Feed
  • High rise buildings
  • High pressure/high head applications.
  • Shipping and offshore.
  • Pressure boosting applications.